Skip to content
My Water Damage and Restoration High Point logo
Air movers stacked beside an open van door, the drying equipment that goes in once extraction is done.

Serving High Point

Structural Drying & Dehumidification in High Point, NC

Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material. The wet area is sealed, air movers and dehumidifiers run as one system, and the material is read at marked points every day against a dry standard from an unaffected room. The equipment leaves on the readings rather than on a date, and the final readings are logged so the rebuild starts on a documented dry structure.

Local contractors · findings documented for your claim

Often needed alongside

  • Emergency Water Extraction

    Standing water is pumped and extracted around the clock, before it climbs the walls and soaks the subfloor. Same-day response where coverage allows.

  • Mold Inspection & Testing

    An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches.

A contractor showing a homeowner a moisture reading on the doorstep, the number that decides when the equipment leaves.
A contractor setting expectations with the homeowner.

Frequently asked questions

Why is the wall beside the fireplace always the damp one?

Because of what is attached to it. An external chimney is a large mass of brick exposed on three sides, and it takes up a great deal of water and releases it slowly, much of it into the junction with the wall it is built against. That wall is being fed by the chimney rather than by anything indoors.

Does the chimney have to dry before the wall will?

Effectively, yes, and that sets the schedule. Masonry of that thickness releases from its faces over weeks rather than days, so a wall dried and closed while the chimney beside it is still loaded will come back. Readings are taken on the masonry as well as on the framing.

Does the chimney pull away from the wall over time?

It opens, and then it lets water in as well as out. Brick and timber frame move differently through a year of temperature and moisture, so the junction between a chimney and the wall gradually works loose, which turns a slow absorption problem into a direct route. That joint is inspected along its height.

The same questions, in context, on the High Point city page.

Need structural drying & dehumidification in High Point now?

Call (833) 243-4415
Call a Local Pro — (833) 243-4415