After the drying
Mold Inspection & Testing in High Point, NC
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
Local contractors · findings documented for your claim
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
Why is the wall beside the fireplace always the damp one?
Because of what is attached to it. An external chimney is a large mass of brick exposed on three sides, and it takes up a great deal of water and releases it slowly, much of it into the junction with the wall it is built against. That wall is being fed by the chimney rather than by anything indoors.
Does the chimney have to dry before the wall will?
Effectively, yes, and that sets the schedule. Masonry of that thickness releases from its faces over weeks rather than days, so a wall dried and closed while the chimney beside it is still loaded will come back. Readings are taken on the masonry as well as on the framing.
Does the chimney pull away from the wall over time?
It opens, and then it lets water in as well as out. Brick and timber frame move differently through a year of temperature and moisture, so the junction between a chimney and the wall gradually works loose, which turns a slow absorption problem into a direct route. That joint is inspected along its height.
The same questions, in context, on the High Point city page.