Skip to content
My Water Damage and Restoration Irving logo
Drying equipment coming off a van in front of a house the morning after a storm, tarps still on the roof.

24/7 Emergency

Storm & Flood Damage Recovery in Irving, TX

The opening is closed, the water is extracted, materials floodwater touched come out, and the structure is dried and rebuilt in that order. The opening is closed first, with tarps or board-up, so the building stops taking on water. Floodwater is extracted, and the porous materials it touched come out rather than dry, since it crossed ground outside. The structure is dried and re-read, and the rebuild waits until the readings and the roof both allow it.

Local contractors · findings documented for your claim

Often needed alongside

  • Emergency Water Extraction

    Standing water is pumped and extracted around the clock, before it climbs the walls and soaks the subfloor. Same-day response where coverage allows.

  • Structural Drying & Dehumidification

    Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.

  • Sewage & Contaminated Water Cleanup

    Sewage and black-water losses are contained, the materials the water touched are removed and disposed of, hard surfaces are disinfected, and the space is dried to a reading.

A contractor at the front door with a homeowner after a storm, sorting what can be dried from what has to go.
A contractor setting expectations with the homeowner.

Frequently asked questions

Both bathrooms are wet. Are there two problems?

Usually one, in the wall between them. These plans put two bathrooms back to back so the pipework serves both from a single chase, and anything that fails in there wets the board on both faces. The room that shows it first is simply the one with the more absorbent finish, not the one with the fault.

Which side gets opened?

Whichever costs less to put back, and it is worth deciding deliberately. Both faces are usually tiled, so the choice comes down to which tile can be matched and which fittings can be moved. Probe readings are taken on both sides first so the opening is made where the water actually is rather than where it is convenient.

How long does a chase like that take to dry?

Four to seven days once it is open, longer if it ran for a while before anyone noticed. The cavity is narrow and enclosed on both faces, so nothing happens until it is opened, and then it comes down reasonably quickly with air directed into it. The framing is read rather than the board.

These questions come from the Irving page.

Need storm & flood recovery in Irving now?

Call (833) 243-4415
Call a Local Pro — (833) 243-4415