Skip to content
My Water Damage and Restoration Irving logo
Containment sheeting and extraction gear coming off a van, the setup for a contaminated-water cleanup.

24/7 Emergency

Sewage & Contaminated Water Cleanup in Irving, TX

Sewage and black-water losses are contained, the materials the water touched are removed and disposed of, hard surfaces are disinfected, and the space is dried to a reading. The affected area is sealed off from the rest of the house. Porous materials the water reached come out and are bagged, with drywall cut to a margin above the visible line; hard surfaces are cleaned and disinfected. The space is then dried and read, and the containment comes down only when cleaning and drying are both finished.

Independent local crews · scoped at the property

Often needed alongside

  • Emergency Water Extraction

    Standing water is pumped and extracted around the clock, before it climbs the walls and soaks the subfloor. Same-day response where coverage allows.

  • Structural Drying & Dehumidification

    Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.

  • Mold Remediation

    Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.

A contractor at the door explaining to a homeowner why the material below the line has to leave the house.
What the inspection turned up, explained at the door.

Frequently asked questions

Both bathrooms are wet. Are there two problems?

Usually one, in the wall between them. These plans put two bathrooms back to back so the pipework serves both from a single chase, and anything that fails in there wets the board on both faces. The room that shows it first is simply the one with the more absorbent finish, not the one with the fault.

Which side gets opened?

Whichever costs less to put back, and it is worth deciding deliberately. Both faces are usually tiled, so the choice comes down to which tile can be matched and which fittings can be moved. Probe readings are taken on both sides first so the opening is made where the water actually is rather than where it is convenient.

How long does a chase like that take to dry?

Four to seven days once it is open, longer if it ran for a while before anyone noticed. The cavity is narrow and enclosed on both faces, so nothing happens until it is opened, and then it comes down reasonably quickly with air directed into it. The framing is read rather than the board.

These questions come from the Irving page.

Need sewage & contaminated water cleanup in Irving now?

Call (833) 243-4415
Call a Local Pro — (833) 243-4415