24/7 Emergency
24/7 Emergency Water Extraction in Exeter, CA
Standing water is pumped and extracted around the clock, before it climbs the walls and soaks the subfloor. Same-day response where coverage allows. Free water is pumped and extracted first, from hard floors and out of carpet and pad, before it climbs further into drywall and subfloor. The wet edge is metered and marked while the water is fresh, and drying equipment goes in the same day, because extraction is where the size of the job is decided.
No obligation: the assessment comes before any scope
Often needed alongside
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
- Sewage & Contaminated Water Cleanup
Sewage and black-water losses are contained, the materials the water touched are removed and disposed of, hard surfaces are disinfected, and the space is dried to a reading.
Frequently asked questions
How is the wall wet when it has barely rained?
Because the water is coming from the ground rather than the sky. The render is carried down into the soil instead of stopping clear of it, so it is in continuous contact with damp earth and draws moisture up into the wall. With twelve inches of rain a year, that is the larger source by a distance.
Where does the damage show first?
At the bottom plate and the base of the board inside, because that is the lowest timber in the wall and the moisture is arriving from below. The wall reads dry at hand height and wet at the floor, which is the opposite of what a roof or window problem produces.
Does drying it solve the problem?
Only until the ground next gets wet. The wall comes back readily enough in air this dry, but the render is still in the soil and will draw again, so the base of the wall has to be separated from the ground for the repair to hold. That is a construction change rather than part of the drying.
These questions come from the Exeter page.