24/7 Emergency
Storm & Flood Damage Recovery in Mount Pleasant, SC
The opening is closed, the water is extracted, materials floodwater touched come out, and the structure is dried and rebuilt in that order. The opening is closed first, with tarps or board-up, so the building stops taking on water. Floodwater is extracted, and the porous materials it touched come out rather than dry, since it crossed ground outside. The structure is dried and re-read, and the rebuild waits until the readings and the roof both allow it.
No obligation: the assessment comes before any scope
Often needed alongside
- Emergency Water Extraction
Standing water is pumped and extracted around the clock, before it climbs the walls and soaks the subfloor. Same-day response where coverage allows.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
- Sewage & Contaminated Water Cleanup
Sewage and black-water losses are contained, the materials the water touched are removed and disposed of, hard surfaces are disinfected, and the space is dried to a reading.
Frequently asked questions
The house is elevated. Where does the drying actually happen?
Mostly underneath, at the floor framing. In elevated construction the wet assembly after a ground-level event is the underside of the floor rather than the rooms, so air is directed at the joists and subfloor from below and readings are taken there. What is in the rooms above is often dry while the structure carrying them is not.
How long does an August loss take here?
Longer than the same loss in spring. August is the wettest month at over seven and a half inches and the air through late summer is warm and already carrying a great deal of moisture, so opening the building achieves nothing and dehumidification does all the work. Equipment time is planned generously from the start rather than extended later.
Does the siding have to come off?
Sometimes at the base course. Fiber-cement sheds water well but the bottom edge sits closest to grade and can hold it against the sheathing behind, which is what actually needs reading. If meter readings at the bottom of the wall stay high after the interior is dry, that course comes off so the sheathing can be dried directly.
The same questions, in context, on the Mount Pleasant city page.