Serving Boston
Structural Drying & Dehumidification in Boston, MA
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material. The wet area is sealed, air movers and dehumidifiers run as one system, and the material is read at marked points every day against a dry standard from an unaffected room. The equipment leaves on the readings rather than on a date, and the final readings are logged so the rebuild starts on a documented dry structure.
Independent local crews · scoped at the property
Often needed alongside
- Emergency Water Extraction
Standing water is pumped and extracted around the clock, before it climbs the walls and soaks the subfloor. Same-day response where coverage allows.
- Mold Inspection & Testing
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches.
Frequently asked questions
The unit above leaked through the plaster ceiling. What is the drying job?
The joist space between the two units and the plaster on both sides of it. The contractor opens the ceiling under the wet area, removes any soaked insulation, dries the cavity with air and dehumidification, and reads the joists and the plaster until both hold the dry standard. The ceiling is patched after that, not before, or the stain returns.
How long does a fieldstone basement take to dry after a December storm?
Longer than a block basement. Fieldstone walls hold water in the mortar and the stone and release it slowly. Once the wet finishes are out, the contractor seals the basement, runs air along the wall base and a dehumidifier sized to the space, and reads the floor and wall daily. Two weeks is common in a wet December.
Can a triple-decker be dried in winter with the heat on?
Yes, and the heat helps. Winter indoor air in Boston is dry, so a sealed room with air movers and a dehumidifier reaches the readings in a few days once the line is repaired. The complication in a triple-decker is that a leak often involves two units, so there are more cavities to read rather than slower ones.
The Boston overview carries this FAQ with the city research.