24/7 Emergency
Sewage & Contaminated Water Cleanup in New Orleans, LA
Sewage and black-water losses are contained, the materials the water touched are removed and disposed of, hard surfaces are disinfected, and the space is dried to a reading. The affected area is sealed off from the rest of the house. Porous materials the water reached come out and are bagged, with drywall cut to a margin above the visible line; hard surfaces are cleaned and disinfected. The space is then dried and read, and the containment comes down only when cleaning and drying are both finished.
Quoted on site by the contractor who visits
Often needed alongside
- Emergency Water Extraction
Standing water is pumped and extracted around the clock, before it climbs the walls and soaks the subfloor. Same-day response where coverage allows.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
Frequently asked questions
How long does an old pine floor take to dry compared with the walls?
Usually much longer. Heart pine is dense and holds water deep in the board, so it cups early and releases moisture slowly. Rather than tear out wood that is hard to replace, the contractor runs drying mats on the floor and keeps reading it after the plaster walls have already reached the dry standard, sometimes for weeks.
The rooms are dry but the house still smells damp. Where is the water?
Very often under the floor. A raised house keeps its living floor above a loss, but the bay between the piers fills and stays wet against the joists. The contractor opens the crawl, removes any soaked insulation, runs air and dehumidification underneath, and reads the joists and subfloor from below until they are dry.
Can plaster walls be dried in place, or do they come out?
Plaster over lath usually dries in place, but slowly. It is dense, so surfaces read dry while the lath behind still holds water, and closing it early is how stains and growth come back. The contractor drills at the base to move air behind the plaster and keeps reading until the lath reaches the standard, which can be two or three times the drywall timeline.
The same questions, in context, on the New Orleans city page.