Serving Grand Junction
Structural Drying & Dehumidification in Grand Junction, CO
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material. The wet area is sealed, air movers and dehumidifiers run as one system, and the material is read at marked points every day against a dry standard from an unaffected room. The equipment leaves on the readings rather than on a date, and the final readings are logged so the rebuild starts on a documented dry structure.
No obligation: the assessment comes before any scope
Often needed alongside
- Emergency Water Extraction
Standing water is pumped and extracted around the clock, before it climbs the walls and soaks the subfloor. Same-day response where coverage allows.
- Mold Inspection & Testing
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches.
Frequently asked questions
What is the white deposit on the slab?
Mineral salts brought up out of the ground. The soils here carry a lot of them and they have never been washed out because it barely rains, so when water moves through a slab it carries them to the surface and leaves them there as the moisture evaporates.
Why does that matter for the floor?
Because the deposits form under anything bonded to the concrete. Salt crystallizing at the surface exerts real pressure, so an adhesive or a covering laid over a slab that is still bringing them up gets pushed off from beneath. The floor fails weeks after the drying was signed off.
What has to happen before a new floor goes down?
The slab has to stop moving moisture, and the surface has to be cleaned of what has already come up. Readings are taken over several days to confirm it has settled, and the deposits are removed rather than covered, because anything left under a new covering will keep working.
This FAQ belongs to the Grand Junction page; it is repeated here.