After the drying
Mold Inspection & Testing in Manitowoc, WI
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
The pro who inspects is the pro who quotes
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
Does an open pit really matter if the pump works?
It does, for the air in the basement. A pit holds standing water most of the year and it evaporates into a cool closed room, which raises the humidity down there permanently. Finished basements with a persistent musty smell frequently have an open pit and no other identifiable source.
What else ends up in an open pit?
Debris, and that is what stops pumps. Anything swept across a basement floor ends up in an uncovered pit, and small items are what jam a float or a check valve. A pump that failed in a storm has usually been sitting with something in the pit for months beforehand.
What sort of cover is worth fitting?
A sealed one with a gasket and a grommet for the discharge, rather than a loose board. It stops the evaporation and the debris both, and it lets the pit be part of a radon system later if that is ever wanted. It is inexpensive and it is the most useful thing that can be done to a sump.
The Manitowoc overview carries this FAQ with the city research.