24/7 Emergency
Storm & Flood Damage Recovery in Port Townsend, WA
The opening is closed, the water is extracted, materials floodwater touched come out, and the structure is dried and rebuilt in that order. The opening is closed first, with tarps or board-up, so the building stops taking on water. Floodwater is extracted, and the porous materials it touched come out rather than dry, since it crossed ground outside. The structure is dried and re-read, and the rebuild waits until the readings and the roof both allow it.
No obligation: the assessment comes before any scope
Often needed alongside
- Emergency Water Extraction
Standing water is pumped and extracted around the clock, before it climbs the walls and soaks the subfloor. Same-day response where coverage allows.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
- Sewage & Contaminated Water Cleanup
Sewage and black-water losses are contained, the materials the water touched are removed and disposed of, hard surfaces are disinfected, and the space is dried to a reading.
Frequently asked questions
How can a dry town be a difficult one to dry a house in?
Because rainfall and humidity are separate things. Twenty-four inches a year means very little water lands on the building, but the air around it stays close to saturation for months, so nothing gives up moisture to it. A wall here can be wet without a single drop having come through the roof.
What does that mean for equipment on a job?
Ventilating with outside air does very little, and dehumidification does most of the work. Opening a building up to dry it, which works in a genuinely dry climate, brings in air that is already carrying most of what it can hold. The space is closed and conditioned instead, which takes longer and uses more equipment.
What reading counts as dry in a climate like this?
Whatever the unaffected material in the same building reads. A target set from a table will be wrong here, because the baseline is higher than it would be elsewhere. The contractor meters timber in a part of the house that was never wet, and that figure, not a standard one, is what the drying aims at.
The same questions, in context, on the Port Townsend city page.