After the drying
Mold Inspection & Testing in New Braunfels, TX
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
No obligation: the assessment comes before any scope
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
What are these walls made of?
A heavy timber frame with the panels between the posts filled with limestone rubble set in lime mortar. The frame carries the building and the infill closes it in, so a single wall is doing two jobs with two quite different materials.
Why does modern repair material cause trouble?
Because lime lets a wall dry and cement does not. Repointing the panels in hard modern mortar seals the moisture in against the timber frame, so the wall stops breathing and the posts inside it stay wet. The repair causes the decay.
How should one of these be dried?
Slowly and from both faces, with the finishes opened rather than sealed. Driving heat at a wall like this shrinks the timber away from the infill and opens the joints, so the work is patient and the readings are taken into the wall.
The New Braunfels overview carries this FAQ with the city research.