After the drying
Mold Inspection & Testing in Smyrna, TN
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
Quoted on site by the contractor who visits
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
What is housewrap meant to do?
Catch whatever gets past the siding and carry it back out. It works entirely by overlap: each course has to lap over the one below, like shingles, so water running down the face of it is always carried outward and away from the sheathing.
What happens when a course laps the wrong way?
It does the opposite of its job. Water running down meets an upward-facing edge and goes behind it instead of over it, straight onto the sheathing. A single reversed course can wet a wall more reliably than no barrier at all would.
How is a reversed lap confirmed?
Only by opening the wall, which is why it is usually found late. A stretch of siding comes off and the lap direction is either right or it is not, and it takes one look. The value of checking is that it explains a wall that keeps coming back wet.
Open the Smyrna FAQ beside the housing and climate notes.