Skip to content
My Water Damage and Restoration Hillsboro logo
A contractor arriving with a meter case and a flashlight rather than drying equipment, there to look before anything is opened.

After the drying

Mold Inspection & Testing in Hillsboro, OR

An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.

No obligation: the assessment comes before any scope

On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.

Often needed alongside

  • Mold Remediation

    Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.

  • Structural Drying & Dehumidification

    Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.

A homeowner at the door describing a smell that came back after a leak while the inspector listens.
An independent contractor, walking the homeowner through what he found.

Frequently asked questions

Why does an orchard shed so much water?

Because the floor of it is managed rather than left alone. Hazelnuts are harvested off the ground, so the orchard floor is kept clear of vegetation and rolled smooth and hard before harvest. That produces a large, compacted, almost bare surface.

When is it worst?

Through the winter, after the ground has been rolled and before anything grows back on it. That coincides exactly with the wet season here, so the neighboring surface is at its least absorbent through the months with the most rain.

Is the runoff anyone's responsibility?

It is a harder question than with a developed site, because ordinary farming is treated differently. In practice the useful route is interception at the boundary rather than a complaint, and a conversation with the grower before a formal one.

These questions come from the Hillsboro page.

Need mold inspection & testing in Hillsboro now?

Call (833) 243-4415
Call a Local Pro — (833) 243-4415