Skip to content
My Water Damage and Restoration Canton logo
Drying equipment coming off a van in front of a house the morning after a storm, tarps still on the roof.

24/7 Emergency

Storm & Flood Damage Recovery in Canton, OH

The opening is closed, the water is extracted, materials floodwater touched come out, and the structure is dried and rebuilt in that order. The opening is closed first, with tarps or board-up, so the building stops taking on water. Floodwater is extracted, and the porous materials it touched come out rather than dry, since it crossed ground outside. The structure is dried and re-read, and the rebuild waits until the readings and the roof both allow it.

The pro who inspects is the pro who quotes

Often needed alongside

  • Emergency Water Extraction

    Standing water is pumped and extracted around the clock, before it climbs the walls and soaks the subfloor. Same-day response where coverage allows.

  • Structural Drying & Dehumidification

    Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.

  • Sewage & Contaminated Water Cleanup

    Sewage and black-water losses are contained, the materials the water touched are removed and disposed of, hard surfaces are disinfected, and the space is dried to a reading.

A contractor at the front door with a homeowner after a storm, sorting what can be dried from what has to go.
An independent contractor, walking the homeowner through what he found.

Frequently asked questions

Why does a parged wall read dry when it is not?

Because the coat is separated from the stone. A meter on the surface reads the cement skim, and that skim can be perfectly dry while water runs down the face of the stone an inch behind it. The reading describes the layer you are touching rather than the wall itself.

How is the actual condition established?

By sounding the wall and reading it deeper. Tapping along the coat shows where it has come away, since a hollow section rings differently from a bonded one. Where that is found, the coat is opened at a low point to see what is behind it, which is usually more informative than any surface reading.

Does the coat have to come off?

Where it has lost its bond, yes. A hollow coat traps water against the stone and stops the wall drying at all, so leaving it makes the drying job impossible rather than merely slower. Where it is still solidly attached to the wall, it can stay and be metered through.

The same questions, in context, on the Canton city page.

Need storm & flood recovery in Canton now?

Call (833) 243-4415
Call a Local Pro — (833) 243-4415