Serving Roswell
Structural Drying & Dehumidification in Roswell, NM
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material. The wet area is sealed, air movers and dehumidifiers run as one system, and the material is read at marked points every day against a dry standard from an unaffected room. The equipment leaves on the readings rather than on a date, and the final readings are logged so the rebuild starts on a documented dry structure.
The pro who inspects is the pro who quotes
Often needed alongside
- Emergency Water Extraction
Standing water is pumped and extracted around the clock, before it climbs the walls and soaks the subfloor. Same-day response where coverage allows.
- Mold Inspection & Testing
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches.
Frequently asked questions
How can the ground be wet where it never rains?
Because the water is not coming from the sky. There is groundwater in this basin standing close to the surface, so the soil beneath a slab can be permanently damp in a place that sees thirteen inches a year. The rainfall figure describes the weather, not the ground.
What does that mean for readings on the floor?
That a dry figure taken from general guidance is the wrong target. The slab has been in contact with damp ground since it was poured and has never read dry, so an unaffected part of the same floor is measured to establish what normal looks like and the affected area is brought back to that.
Could the flooring have failed on its own?
It happens here often enough to check first. A covering bonded to a slab that is drawing from wet ground will lift or discolor without any loss at all, so establishing whether there was ever a source is part of the first visit. The answer changes the work entirely.
This FAQ belongs to the Roswell page; it is repeated here.