After the drying
Mold Inspection & Testing in Wildwood, NJ
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
No obligation: the assessment comes before any scope
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
Why do pipes split here with such mild winters?
Because the buildings were not built for any winter at all. These started as summer cottages, and the plumbing was extended into walls that have no insulation behind them. A couple of nights below freezing is enough when there is nothing between the pipe and the outside.
Where are the vulnerable runs?
In the outside walls, in the space under a floor that was once open, and in anything added to the back of the building. The original cottage core is usually the warmest part, and the trouble is almost always in what came afterward.
What is worth doing before a cold snap?
Knowing where the main shutoff is and being able to reach it, more than anything else. Insulating what can be reached helps, but the difference between a wet floor and a wet building is how long the water runs before somebody closes the valve.
This FAQ belongs to the Wildwood page; it is repeated here.