After the drying
Mold Inspection & Testing in Tupelo, MS
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
Independent local crews · scoped at the property
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
The wall was opened and there is old damage behind it. What happens now?
It gets read and included. Old staining on framing is not automatically a problem, but wood that still carries moisture is, and the only way to tell is with pins rather than by eye. Where the readings are high the material comes out with the new work; where the wood is dry and sound, it stays and the opening is closed.
With no cold season to help, what decides the length of the run?
Seven to ten days, and the season barely changes it. Places with a hard winter get free drying from heated indoor air for part of the year. Here the building is mild and humid most of the time, so the whole load falls to the equipment and the run length is set by the material rather than by the month.
What decides whether the roof decking comes off?
Its readings and its condition, taken from inside the attic. Decking that is delaminating or soft is replaced whatever the meter says. Sound decking that reads high is dried from below with air moved through the attic, which is far cheaper than a tear-off. The decision is made after a day of readings rather than on first sight.
This FAQ belongs to the Tupelo page; it is repeated here.