After the drying
Mold Inspection & Testing in Port Huron, MI
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
Quoted on site by the contractor who visits
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
How much does a passing ship actually move?
More than people expect. A large vessel in a confined channel pulls the water down along the bank as it passes and then sends a surge back, so the level at the shore drops and rises by a foot or more within a minute or two.
Why is that harder on a bank than a storm?
Because it repeats. A storm works a bank for hours and then stops for months; ship wash does the same thing several times a day through the whole navigation season, so the bank never gets a period in which to stabilize.
What holds up against it?
Properly engineered bank protection keyed well below the low-water level, rather than anything placed on the surface. Riprap tipped on a bank without a keyed toe is undermined by the drawdown and ends up at the bottom of the channel.
The same questions, in context, on the Port Huron city page.