Serving Revere
Structural Drying & Dehumidification in Revere, MA
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material. The wet area is sealed, air movers and dehumidifiers run as one system, and the material is read at marked points every day against a dry standard from an unaffected room. The equipment leaves on the readings rather than on a date, and the final readings are logged so the rebuild starts on a documented dry structure.
Quoted on site by the contractor who visits
Often needed alongside
- Emergency Water Extraction
Standing water is pumped and extracted around the clock, before it climbs the walls and soaks the subfloor. Same-day response where coverage allows.
- Mold Inspection & Testing
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches.
Frequently asked questions
Why is the cheek the weak point?
Because it is where a vertical surface meets a sloping one, twice per dormer, in an area the size of a doorway. The flashing there has to step up the slope under the cladding, and it is fiddly work that is frequently done badly or repaired with sealant. The dormer roof itself is simple by comparison.
What does cheek-wall damage look like inside?
Staining at the head of the dormer window, at the sloping ceiling beside it, or in the knee wall space behind. Water entering at a cheek runs down inside the cheek wall and into the floor of the upper room, so it can appear some distance from the dormer itself.
Does snow make it worse?
Considerably. Snow lying against the side of a dormer stays there long after the open roof has cleared, and meltwater backs up behind it against the exact junction that is most difficult to flash. That is why these leak in February rather than during the rain that anybody would blame.
This FAQ belongs to the Revere page; it is repeated here.