After the drying
Mold Inspection & Testing in Columbus, IN
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
No obligation: the assessment comes before any scope
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
Why is the front of the house still reading wet?
Because it is a different wall. Masonry veneer holds a great deal of water and gives it back slowly from one face, while a sided wall dries quickly through the cavity behind it. The same loss on the same house produces very different numbers depending on which elevation it reached.
What happens where the two meet?
That corner gets looked at directly, because it is a junction between systems rather than a continuation of either. The veneer has a cavity behind it and the sided wall does not, so water crossing the corner moves from one behavior to another, and the framing at the junction is read on both sides.
Does that change the schedule?
It usually means two of them. The sided elevations come down at a normal pace and can be closed up, while the masonry front is still releasing for a week or more afterward. Treating the house as one assembly is what leads to a wall being closed over moisture that was still coming out.
The Columbus overview carries this FAQ with the city research.