After the drying
Mold Inspection & Testing in Tybee Island, GA
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
The pro who inspects is the pro who quotes
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
Most of the water ran straight out underneath. Is the floor still a problem?
Usually yes, and that drainage is why it gets underestimated. Water leaving the structure quickly means less standing in the room, but the subfloor and joists still took it on the way through, and the seams and the insulation hold it. The framing is read with pins from below rather than judged by how little was left upstairs.
Does the open underside help it dry?
Less than you would expect. The air under a raised house here is warm and humid for most of the year, so it carries very little away. What the open space does give is access: equipment can be set beneath the floor and air ducted along the joists, which is the main advantage of the construction.
What is worth checking while the underside is open?
The metal. Straps, hangers and bolts in salt air corrode wherever they stay damp, and the underside of a raised house is the one place they can be inspected without taking anything apart. It costs nothing to look while equipment is already down there and it is the only opportunity anyone will get.
This FAQ belongs to the Tybee Island page; it is repeated here.