Serving Fort Collins
Structural Drying & Dehumidification in Fort Collins, CO
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material. The wet area is sealed, air movers and dehumidifiers run as one system, and the material is read at marked points every day against a dry standard from an unaffected room. The equipment leaves on the readings rather than on a date, and the final readings are logged so the rebuild starts on a documented dry structure.
Quoted on site by the contractor who visits
Often needed alongside
- Emergency Water Extraction
Standing water is pumped and extracted around the clock, before it climbs the walls and soaks the subfloor. Same-day response where coverage allows.
- Mold Inspection & Testing
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches.
Frequently asked questions
Why is the floor wettest in one corner?
Because something is pulling it there. A fan drawing from beneath the slab runs continuously, and after a leak it moves moisture through the ground under the floor toward its own suction point rather than letting it spread evenly. The highest readings can be a long way from where the water came in.
Should the system be turned off?
Usually for the drying, and it is a decision taken early. Left running it keeps moving moisture around under the floor and can pull damp air through the slab into the house. Turned off, the ground beneath settles and the readings start describing where the water actually is.
What is checked before it goes back on?
The pipe itself and the ground around it, because water can get into the system as well as be moved by it. Once the slab has come down and the source is repaired the fan goes back on, but running it through a wet subgrade is not doing what it was installed to do.
Read it with the local conditions on the Fort Collins page.