After the drying
Mold Inspection & Testing in Lancaster, CA
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
The pro who inspects is the pro who quotes
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
Why does the pad settle?
Because it sits on disturbed ground. The soil against a foundation was excavated and backfilled during construction and never regained the density of the ground around it, so anything placed on it keeps sinking. The pad tilts toward the wall, and the surface around it goes with it.
Is the equipment itself at risk?
It can be, but the building matters more. A unit sitting out of level runs badly and its connections take strain, which is a service issue. The larger problem is a hollow against the foundation in a place where the ground collapses when wetted, which is what moves a slab.
What does correcting it involve?
Lifting the pad and regrading the ground under and around it so that it falls away from the wall. It is straightforward work while the unit is being serviced or replaced, and it is worth doing then rather than as its own job, because the lines have to be disconnected either way.
The Lancaster overview carries this FAQ with the city research.