After the drying
Mold Inspection & Testing in Oshkosh, WI
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
No obligation: the assessment comes before any scope
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
Why does the rim joist keep coming up in winter losses?
Because it is the coldest framing in a heated house and lines are often run right against it, behind insulation that keeps the pipe on the cold side. With five months below freezing, that is a reliable failure point. The insulation is pulled so the rim is exposed and readable, and the framing is dried before anything is packed back against it.
A property was closed for the winter and a line ran. What survives?
Structure usually does; finishes usually do not. Water running unattended for weeks saturates drywall, insulation and pressed-board cabinetry past recovery, and those are removed. Solid framing and masonry generally dry back once reached and read. The scope is set after the building is opened rather than guessed from what is visible at the door.
Does being close to the lake keep a basement damp here?
It raises the starting point rather than changing the method. Ground near the water stays wetter through the year, so a basement wall here often begins a job already carrying moisture that a drier site would not have. That shows up as base readings that fall more slowly, so the wall is read at the bottom over several days rather than judged once.
These questions come from the Oshkosh page.