After the drying
Mold Inspection & Testing in Rockwood, VA
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
No obligation: the assessment comes before any scope
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
What happens to ground with timber buried in it?
It loses volume. Wood rots away over twenty or thirty years and the soil above drops into the space it occupied, so the surface settles in patches. Nothing about the settlement is visible while it happens, and it usually shows up first as a low spot holding water where the yard used to shed it.
How does settled ground become the building's problem?
Through the grade and the hard surfaces on it. A drive or a patio that has settled at its outer edge now falls back toward the building, and a yard that has developed a hollow beside the foundation holds water against it after every storm. The house has not moved; the ground around it has.
Can anything be done besides filling the hollows?
Filling is the right first move, and it often needs doing more than once while the settlement continues. Where a slab has tipped, lifting or replacing it is the real answer. It is worth watching whether a filled area settles again the following year, because that tells you whether the ground beneath has finished moving.
These questions come from the Rockwood page.