After the drying
Mold Inspection & Testing in Greenwood, SC
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
Quoted on site by the contractor who visits
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
How much water comes through one?
More than people expect in a driven storm. The flap seals by hanging closed, so any wind pushing on it opens it slightly and rain comes through at floor level. Where the door opens onto a patio or a paved area that already sheds toward it, that is a direct route inside.
Does it damage the door as well?
Usually, over time. Cutting the opening breaks through the bottom of the door where the construction is weakest and exposes the core to moisture at every edge. On a timber door that means swelling and delamination around the frame of the fitting, and on a metal one it means rust from the inside out.
Is there a better position for one?
Through a wall rather than a door, where that is practical, or into a garage or utility room rather than into finished space. If it stays in the door, a unit with a proper sealing frame and a raised sill beneath it handles weather far better than the basic flap most of these have.
Read it with the local conditions on the Greenwood page.