Skip to content
My Water Damage and Restoration Rochester logo
Containment poles and a negative-air machine coming off a van, the setup for removing growth without spreading it.

Contained removal

Mold Removal & Remediation in Rochester, NY

Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in. The area is sealed and put under negative air, affected porous material comes out, and what remains is cleaned and treated. The assembly is then dried and read to the same standard as any water loss before it is closed, because remediation over a still-wet assembly puts the same growth back behind new drywall.

No obligation: the assessment comes before any scope

Remediation here is the tail of a water job: growth is what an unfinished drying leaves behind, and removing it without finishing the drying puts it back. The contractor establishes how far the growth extends and what moisture is still feeding it, removes what grew, and dries and reads the assembly before it is closed. The service note below covers the sequence in this city.

Often needed alongside

  • Mold Inspection & Testing

    An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches.

  • Structural Drying & Dehumidification

    Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.

A contractor at the door walking a homeowner through what comes out, what gets cleaned, and when the wall closes up.
An independent contractor, walking the homeowner through what he found.

Frequently asked questions

The plaster looks fine but it is coming down. Why?

Because of what is behind it. Plaster laid on gypsum lath depends on that board for its strength, and the board loses it once it has been thoroughly wet. The surface can look sound while the backing has turned soft, which is why a wet ceiling of this type is treated as unsafe rather than inspected at leisure.

How do you tell which lath is behind a wall?

A small hole in an inconspicuous place, early. It is worth knowing on day one because it decides whether a wall is dried and kept or removed and replaced, and those are very different jobs. Wood lath shows as narrow strips with gaps; gypsum lath is a continuous board and is the one that changes the scope.

Is a winter loss easier to save than a summer one?

Considerably, if it is caught quickly. With the heating on the indoor air is dry, so a wall that is opened and ventilated promptly can come down before the lath has softened. The same loss left for a week is finished either way, and the difference in this housing is measured in days rather than in equipment.

The same questions, in context, on the Rochester city page.

Need mold remediation in Rochester now?

Call (833) 243-4415
Call a Local Pro — (833) 243-4415