After the drying
Mold Inspection & Testing in Independence, MO
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
Quoted on site by the contractor who visits
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
The board looks undamaged. Why is it being pulled?
Because it is fastened to the wet material. With no cavity between the board and the block, the finish draws moisture straight out of the masonry and there is no air space to dry. Nothing can be read through it and nothing can reach behind it, so it comes off along the wet run and the block is dried directly.
Do the furring strips come off too?
Where they are wet, yes. Strips sit tight against the block and hold water at every contact point, and they dry more slowly than anything around them. They are read with pins, and whatever is high comes out. Sound dry strips can stay and the board is refitted to them once the wall holds.
Is May really the hardest month for this?
It is the awkward one. The heaviest rain of the year arrives while the basement floor and walls are still carrying winter temperature and the outside air has turned humid, so any ventilation puts moisture straight onto the concrete. The space is sealed and dehumidified instead, and the run is several days longer than a February one.
Read it with the local conditions on the Independence page.