After the drying
Mold Inspection & Testing in Woodmore, MD
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
The pro who inspects is the pro who quotes
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
Why does that joint matter more than a crack?
Because of where it sits and what feeds it. The drive is a large paved area falling toward the garage, and everything it collects arrives at that line. A crack in the middle of a slab takes what lands on it; this joint takes what the whole drive delivers, and it leads under the building.
What happens under the garage slab?
The fill beneath it gets wet and moves. Repeated wetting washes fines out from under the slab edge, which is what produces the settlement and cracking people notice years later. Where the garage shares a wall with living space, the water also reaches the bottom plate on the other side of it.
How is the joint dealt with properly?
Cleaning it right out and filling it with a flexible sealant made for the purpose, rather than topping up what is there. The joint has to be able to move, so a hard filler cracks straight away. It is a small job that gets skipped because nobody thinks of a driveway as part of the building.
These questions come from the Woodmore page.