After the drying
Mold Inspection & Testing in Brock Hall, MD
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
Independent local assessors · no obligation to proceed
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
Why is the floor still wet when the room reads dry?
Because the room has two climates. Warm dry air rises to the top of a two-story space and the coolest, dampest air settles at floor level, which is exactly where the wet material is. A reading taken standing up describes the air by your head rather than the air doing the work.
How is that dealt with?
By moving the air down rather than around. Equipment is set to push the dry air back toward the floor and across the wet surfaces instead of letting it collect at the ceiling, and readings are taken low down. In a tall room that arrangement matters more than the size of the equipment.
Does the open plan make this a bigger job?
It makes it a larger volume for the same wet area. The whole two-story space and the balcony share one body of air, so the equipment has to hold a condition in all of it to dry a floor in part of it. Closing the space off where it can be done shortens things considerably.
Read it with the local conditions on the Brock Hall page.