After the drying
Mold Inspection & Testing in Framingham, MA
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
Quoted on site by the contractor who visits
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
Why is a plumbing chase a difficulty?
Because it is closed and it is shared. The pipework serving several homes runs up one shaft with board over it at every level, so a failure inside the chase drops straight down through the building. Nobody can see into it, and reaching it means opening a wall in somebody's home.
Which unit gets the damage?
The ones below, and frequently not the one at fault. Water released in the chase on the fourth floor passes the third and second on its way down, wetting board and insulation as it goes. The household that calls it in is usually not the household whose fixture failed.
How is access usually arranged?
Through the building's management rather than between neighbors, and it needs to be quick. The contractor has to reach the chase at the level of the failure and check it at every level below, which means entry to several homes. Buildings that have an access panel on each floor make all of this far shorter.
Read it with the local conditions on the Framingham page.