After the drying
Mold Inspection & Testing in New Albany, IN
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
Independent local crews · scoped at the property
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
Why were gutters made of wood?
Because they were made the same way the rest of the house was, and maintained the same way. A well-painted wooden gutter lasts decades, and many of these are original. The arrangement only fails when the paint does, and then the gutter is a length of saturated timber fixed to the eave.
What happens when one rots through?
Water goes into the eave rather than off the building. The gutter is fixed to the fascia and the rafter ends, so a failure discharges straight into the structure it hangs on. Damage appears at the top of the wall and in the roof space rather than at the ground, which is where people look.
Should they be replaced with metal?
It depends on the house and on what is wanted from it. Metal is lower maintenance and looks different; relining the existing timber keeps the appearance and adds decades. What does not work is leaving them unpainted for another few years, because that is what turns a maintenance job into a carpentry one.
These questions come from the New Albany page.