After the drying
Mold Inspection & Testing in Lafayette, IN
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
Independent local assessors · no obligation to proceed
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
What is the ground on the bottomland like?
Layered, because the river built it that way. Floods laid down sand in some years and fine silt in others, so the ground is a stack of bands rather than a uniform soil, and each band behaves differently from the one above it.
Why do layered bands matter to a basement?
Because water moves along the sandy bands and stops at the silty ones. That means it arrives at a wall at whatever depth the sand happens to be, and a drain set above or below that layer misses it entirely.
How is the layering established?
With a hand auger or a small test hole, which takes an hour and settles what would otherwise be guesswork. Knowing which depth the water is traveling at is what makes the difference between a drain that works and one that does not.
Read it with the local conditions on the Lafayette page.