After the drying
Mold Inspection & Testing in Streamwood, IL
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
Quoted on site by the contractor who visits
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
Why do these tubs cause trouble?
Because there is a working machine underneath one. The pump, the hoses that feed the jets and the connections between them sit inside a closed box, and every one of those is a joint that can give way. A tub that only holds water has none of that, which is why a failure here rarely stops at the tub.
How would I know if something is leaking under there?
Often you would not, until the ceiling below shows it. The deck is closed, so a slow failure runs into the floor structure with nothing appearing in the bathroom. A musty smell around the tub, or a floor that feels soft near it, is worth taking seriously before anything is visible downstairs.
What does opening the tub deck involve?
Usually removing the panel or the tiled apron on one side, which is not always designed to come off. Many of these decks were tiled in place with no access provided at all, so reaching the pump means cutting an opening. It is worth putting a proper access panel back in when the work is finished.
The same questions, in context, on the Streamwood city page.