After the drying
Mold Inspection & Testing in Homewood, IL
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
The pro who inspects is the pro who quotes
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
What does a failed window seal actually do?
Lets air and moisture into the space between the two panes. Once that happens the unit fogs and holds water, and the water has to go somewhere when it condenses and runs down, which is into the frame and the sill at the bottom of the opening.
Is it only a cosmetic problem?
It starts that way and does not stay there. A unit that has been fogged for years has been draining into its frame that whole time, so by the time anyone minds the appearance enough to act, the sill and often the wall below have taken a great deal.
What should be checked before replacing the glass?
The frame and the wall beneath it, by opening up rather than by looking. Replacing the unit and leaving a rotted sill in place is a repair that fails within a few years, and the condition below is not visible from either side.
These questions come from the Homewood page.