After the drying
Mold Inspection & Testing in Coeur d'Alene, ID
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
No obligation: the assessment comes before any scope
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
The wettest month is also the coldest. What does that mean for a loss?
It means the building offers the least help of the year. December brings the heaviest precipitation and the freeze is already running, so the ground is cold and wet and the outdoor air is no use. The heating system does dry the indoor air, which helps once a cavity is open, but the space below the floor stays cold and slow.
One basement wall is dry and the other is not. Why?
Because a daylight basement has one wall buried against the slope and another open to the air, and they behave quite differently. The buried wall stays cold, takes ground moisture and releases slowly; the open wall dries much like any above-grade wall. They are read separately and the equipment is weighted toward the buried side.
Does the crawl space need a ground cover?
Where the soil is contributing, yes. Cool damp ground under a floor keeps feeding moisture up into the joists while equipment is trying to remove it, and through the cold months it does not dry on its own. A cover cuts that off so the framing readings can actually come down, rather than holding at a level the soil keeps resetting.
These questions come from the Coeur d'Alene page.