After the drying
Mold Inspection & Testing in Davie, FL
An independent assessor confirms whether the assembly that got wet is actually dry, whether growth started while it was not, and how far it reaches. An inspection after a water loss confirms whether the assembly that got wet is dry now and whether growth started while it was not. Readings are taken in the material, cavities are opened where the readings point, and the result is a written scope of what is dry, what is not, and what has to be corrected for the repair to hold.
No obligation: the assessment comes before any scope
On this site, inspection is the last check of a water job rather than the start of a separate one. Most people reach this page because something was wet, was dried, and a smell or a stain came back. The inspection answers whether the material is dry now and whether anything grew while it was not. Nothing here is medical advice; questions about health are for a clinician.
Often needed alongside
- Mold Remediation
Growth and the material it grew into come out under containment, what remains is cleaned, and the assembly is dried and read before anything closes it in.
- Structural Drying & Dehumidification
Sealed air movers and dehumidifiers bring framing, subfloor and drywall back to a measured dry standard, with daily readings logged from inside the material.
Frequently asked questions
Why does it matter that the house is frame?
Because everything about the drying changes. A block wall holds water in its cores and gives it back slowly from the face; a framed wall has a cavity, insulation and structural timber in it, so the same loss reaches material that can actually rot.
Does the local trade expect that?
Not always, and it is worth saying so. The assumption around here is block, so scopes get written for block, and a framed wall treated that way stays closed up when it needed opening. Establishing which one you have on the first day matters.
What gets checked that would not be otherwise?
The bottom of the wall, where the framing sits on the slab. That junction is the part that decides whether this is a finish repair or a structural one, and it cannot be judged from a meter reading taken on the surface of the board.
The Davie overview carries this FAQ with the city research.